The 2023 Subaru Crosstrek is a versatile crossover known for its reliability, standard all-wheel drive, and strong efficiency. To keep your Crosstrek running at its best, one of the most important maintenance tasks is regular oil changes. Knowing the correct oil type and oil capacity ensures your engine stays protected, efficient, and long-lasting. This guide covers the 2023 Subaru Crosstrek oil capacity, recommended oil type, and service tips.
Quick Answer – Oil Capacity
- 2.0L 4-cylinder (FB20 engine): 4.7 quarts (4.5 liters) with filter
- 2.5L 4-cylinder (FB25 engine): 4.8 quarts (4.5 liters) with filter
- Oil Type: SAE 0W-20 full synthetic (Subaru recommends Genuine Subaru Oil or equivalent)
- Filter Recommendation: OEM Subaru 15208AA15A or equivalent high-quality aftermarket filter
Recommended Oils for 2023 Subaru Crosstrek
- Mobil 1 Advanced Fuel Economy 0W-20 – Excellent fuel efficiency and wear protection.
- Valvoline Advanced Full Synthetic 0W-20 – Affordable and widely available, meets Subaru requirements.
- Castrol EDGE Advanced Full Synthetic 0W-20 – Premium oil with titanium additives for maximum performance.
- Pennzoil Platinum Full Synthetic 0W-20 – Made from natural gas, known for keeping engines clean.
Why Oil Capacity Matters
Adding the correct amount of oil is crucial. Too little oil can lead to increased friction and engine wear, while too much can cause foaming and pressure issues. The 2023 Subaru Crosstrek requires between 4.7 and 4.8 quarts depending on the engine. Always check your dipstick after filling to confirm the correct level.
DIY Oil Change Guide
Changing your own oil is simple with the right tools. Here’s a quick guide:
- Warm up the engine for 5 minutes to allow oil to flow more easily.
- Place a drain pan under the oil pan and remove the drain plug.
- Allow the old oil to drain completely.
- Replace the drain plug and remove the old oil filter.
- Install a new oil filter (lightly oil the gasket before tightening).
- Refill with 4.7–4.8 quarts of 0W-20 full synthetic oil.
- Start the engine, let it run for a minute, then recheck the dipstick and top off if needed.
Comparison of Recommended Oils
| Brand | Key Features | Viscosity | Price Link |
|---|---|---|---|
| Mobil 1 Advanced | Fuel saving, OEM-approved | 0W-20 | Check Price |
| Valvoline Advanced | Budget-friendly, reliable protection | 0W-20 | Check Price |
| Castrol EDGE | Titanium tech, premium wear protection | 0W-20 | Check Price |
| Pennzoil Platinum | Made from natural gas, strong cleaning power | 0W-20 | Check Price |
FAQ Section
What oil does the 2023 Subaru Crosstrek take?
Subaru recommends SAE 0W-20 full synthetic oil for both the 2.0L and 2.5L engines.
How many quarts of oil does the 2023 Subaru Crosstrek need?
The 2.0L engine requires 4.7 quarts, while the 2.5L engine requires 4.8 quarts with filter.
Can I use 5W-30 instead of 0W-20?
No, Subaru specifically recommends 0W-20 for optimal performance and fuel efficiency. Use 5W-30 only in emergency situations.
How often should I change the oil in a 2023 Subaru Crosstrek?
Subaru recommends oil changes every 6,000 miles or 6 months, whichever comes first.
Which oil filter should I use?
The OEM filter is Subaru part 15208AA15A, though quality aftermarket filters such as Fram Ultra, Mobil 1, or Bosch Premium can also be used.
Conclusion
The 2023 Subaru Crosstrek requires 4.7–4.8 quarts of 0W-20 full synthetic oil depending on the engine. Choosing a high-quality oil like Mobil 1, Valvoline, Castrol, or Pennzoil ensures your Crosstrek delivers the reliability and efficiency it’s known for. Order your 0W-20 oil today and keep your Subaru running at peak performance.
Leave A Reply